Apr 25, 2024 · This article is rather short that only mentions the script that is needed to make an iMX93EVK act as a USB mass storage device so that whenever you connect your iMX device to a …

Mar 21, 2025 · In my application scenario, after the platform is booting, I want to use the mass storage function to access the SD card or eMMC through PC in uboot. Unfortunately, I found that the USB …

Jun 19, 2019 · The target board shows up as a 'Freescale i.MX53 USB BulkIO device' in the USB tree in device manager, when connected and powered up. When run the MFG tool recognizes the board …

Apr 28, 2025 · # Bind the function to the config ln -s functions/mass_storage.0 configs/c.1/ # Bind USB device to UDC ls /sys/class/udc # This gives you the UDC name, like 49000000.usb echo ci_hdrc.0 > …

Jul 10, 2014 · Hi, we have developed t1042 based board ,where USB mass storage device is not getting detected at u-boot. Below is the u-boot log messages, => usb

I'm working with a custom board based on the i.MX8ULP, and I'm trying to use the eMMC as a USB mass storage device. I followed the same steps that worked on the IMX8ULP EVK9 board, where the …

Nov 4, 2019 · On the i.MX 8QuadMax board from NXP there is only one USB brought out, this is the one you need for the Serial Download Protocol (Type-C connector). The second USB is not on there, but …

Aug 30, 2018 · For HID device, customer can connect it to USB host; for Mass storage, customer can use a USB OTG to HOST cable to connect microUSB connector, and the other side of the cable is …

Mar 20, 2023 · I'm confident my USB hardware is correct since I can run the uboot "ums mmc 2" command to make my board enumerate as a mass storage USB device. Also, as stated above, I can …

Nov 6, 2023 · Hi, I connected our custom board (usb on the board -> m.2 on the host) and tried to use the g_mass_storage module though it doesn't show any sign of life on the host. if I use the the ums …